Pipe Relining: How Does It Work?

Just like other parts of your house, you should ensure that your plumbing system is working efficiently. If they’re not functioning properly, they might cause further damage to your valuables and infrastructure. To avoid this problem, it’s essential to inspect your pipes and make sure there are no leakages or other issues.

However, finding out that the pipes are damaged doesn’t necessarily mean you have to replace them right away. This is where pipe relining Sydney enters the picture. It’s a process that involves the use of materials such as Resin, Epoxy, Silicate, and many more to strengthen the pipes and make them stronger.

To have a better understanding of the pipe relining process, read on to learn how it really works.

Pipe Damage Inspection

Before getting started with the relining process, you need to figure out what are the problems of the pipe. To do this, you need to hire pipe relining services to get the job done right. The professional plumber will use a drain camera to see what’s going on inside the pipelines. They will check whether there are clogs that need to be cleared and the possible damage that also need to be solved.

Moreover, the results of the inspection can be used to determine whether you’re ready for the pipe relining procedure.

Cleaning And Removal Of All The Blockages

When you find the blockages along the pipelines, the next step you should do is to get all these things out of the way. For this method, the plumbing professional will use a robotic cutter to cut out all the clogs, such as wood, cement, or steel. Then, they will use pressure washing water jetter to remove all the blockages and clean the pipes.

Final Inspection

After cleaning and removing all the blockages inside your pipelines, you should conduct a final inspection to make sure that the pipes are ready for relining. You can send down a drain camera to inspect what’s happening inside and to determine how the pipelines should be relined and the amount of lining needed for the process.

Preparation Of The Lining

At this stage, the linings will be prepared by measuring the length and width of the pipelines to know the amount of substances that should be used for the project. Typically, the plumber will utilize an inversion pipe relining to come up with a mixture of Polyester, Resin, and other substances. Also, they will mix a glass-fiber reinforced plastic UV pipelining to make the coating more effective.

Insertion Of The Pipe Lining

The plumber will use a specialized inversion drum to ensure that the mixture will be adequately attached to the surface. An inversion process will be performed to the pipe to make sure the other side of the surface will have the same process. This will guarantee the durability of the pipe lining.

Curing Of The Pipe Lining

After the insertion of the pipe lining, the next step is to allow the resin to heal, so it’ll become a hard protective coat inside the pipe. And since you’re using the inversion pipe relining procedure, you can have the lining cured by itself or use hot water to speed up the curing process.

Removal Of The Excess Materials

Once the resin has cooled down, the last thing you should do is to scrape off the excess materials around the pipelines. You can ask the plumbing expert to remove the junctions and inspection pits by using grinders.

Conclusion

Beez Neez Plumbing

With the information presented above, it’s clear that sewer pipe relining Sydney can be a cost-effective method to fix damaged pipes without spending much money. But, unless you’re an experienced plumber, it’s best to entrust the whole process of relining to professionals. That way, you can be sure that the work will be done properly and without hassle.